Bootdata ok (command line is ro root=/dev/md1 rhgb quiet) Linux version 2.6.6-1.435.2.3smp (bhcompile@thor.perf.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 SMP Thu Jul 1 08:51:38 EDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000fbff0000 (usable) BIOS-e820: 00000000fbff0000 - 00000000fbfff000 (ACPI data) BIOS-e820: 00000000fbfff000 - 00000000fc000000 (ACPI NVS) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000180000000 (usable) Scanning NUMA topology in Northbridge 24 Number of nodes 2 (10010) Node 0 MemBase 0000000000000000 Limit 00000000ffffffff Node 1 MemBase 0000000100000000 Limit 000000017fffffff node 1 shift 24 addr 100000000 conflict 0 Using node hash shift of 25 Bootmem setup node 0 0000000000000000-00000000ffffffff Bootmem setup node 1 0000000100000000-000000017fffffff No mptable found. On node 0 totalpages: 1048575 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 1044479 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 On node 1 totalpages: 524287 DMA zone: 0 pages, LIFO batch:1 Normal zone: 524287 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f68e0 ACPI: RSDT (v001 A M I OEMRSDT 0x05000428 MSFT 0x00000097) @ 0x00000000fbff0000 ACPI: FADT (v001 A M I OEMFACP 0x05000428 MSFT 0x00000097) @ 0x00000000fbff0200 ACPI: MADT (v001 A M I OEMAPIC 0x05000428 MSFT 0x00000097) @ 0x00000000fbff0380 ACPI: OEMB (v001 A M I OEMBIOS 0x05000428 MSFT 0x00000097) @ 0x00000000fbfff040 ACPI: SRAT (v001 A M I OEMSRAT 0x05000428 MSFT 0x00000097) @ 0x00000000fbff3490 ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x00000000fbff3580 ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:5 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:5 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfebff000] global_irq_base[0x18]) IOAPIC[1]: Assigned apic_id 3 IOAPIC[1]: apic_id 3, version 17, address 0xfebff000, GSI 24-27 ACPI: IOAPIC (id[0x04] address[0xfebfe000] global_irq_base[0x1c]) IOAPIC[2]: Assigned apic_id 4 IOAPIC[2]: apic_id 4, version 17, address 0xfebfe000, GSI 28-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Checking aperture... CPU 0: aperture @ 200000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 8000000 Built 2 zonelists Kernel command line: ro root=/dev/md1 rhgb quiet console=tty0 Initializing CPU#0 PID hash table entries: 16 (order 4: 256 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 1593.257 MHz processor. Console: colour VGA+ 80x25 Memory: 6067848k/6291456k available (1919k kernel code, 0k reserved, 1354k data, 184k init) Calibrating delay loop... 3129.34 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Using local APIC NMI watchdog using perfctr0 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU0: AMD Opteron(tm) Processor 242 stepping 0a per-CPU timeslice cutoff: 1023.56 usecs. task migration cache decay timeout: 2 msecs. Booting processor 1/1 rip 6000 rsp 100fbf8bf58 Initializing CPU#1 Calibrating delay loop... 3178.49 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) AMD Opteron(tm) Processor 242 stepping 0a Total of 2 processors activated (6307.84 BogoMIPS). ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 4-0, 4-1, 4-2, 4-3 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 Using local APIC timer interrupts. Detected 12.447 MHz APIC timer. checking TSC synchronization across 2 CPUs: passed. time.c: Using PIT/TSC based timekeeping. Brought up 2 CPUs CPU0: online domain 0: span 01 groups: 01 domain 1: span 03 groups: 01 02 CPU1: online domain 0: span 02 groups: 02 domain 1: span 03 groups: 02 01 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) usbcore: registered new driver usbfs usbcore: registered new driver hub IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1) 00:00:07[A] -> 2-16 -> IRQ 16 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1) 00:00:07[B] -> 2-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1) 00:00:07[C] -> 2-18 -> IRQ 18 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1) 00:00:07[D] -> 2-19 -> IRQ 19 IOAPIC[1]: Set PCI routing entry (3-3 -> 0xc9 -> IRQ 27 Mode:1 Active:1) 00:02:03[A] -> 3-3 -> IRQ 27 IOAPIC[1]: Set PCI routing entry (3-0 -> 0xd1 -> IRQ 24 Mode:1 Active:1) 00:02:03[B] -> 3-0 -> IRQ 24 IOAPIC[1]: Set PCI routing entry (3-1 -> 0xd9 -> IRQ 25 Mode:1 Active:1) 00:02:03[C] -> 3-1 -> IRQ 25 IOAPIC[1]: Set PCI routing entry (3-2 -> 0xe1 -> IRQ 26 Mode:1 Active:1) 00:02:03[D] -> 3-2 -> IRQ 26 IOAPIC[2]: Set PCI routing entry (4-0 -> 0xe9 -> IRQ 28 Mode:1 Active:1) 00:01:03[A] -> 4-0 -> IRQ 28 IOAPIC[2]: Set PCI routing entry (4-1 -> 0x32 -> IRQ 29 Mode:1 Active:1) 00:01:03[B] -> 4-1 -> IRQ 29 IOAPIC[2]: Set PCI routing entry (4-2 -> 0x3a -> IRQ 30 Mode:1 Active:1) 00:01:03[C] -> 4-2 -> IRQ 30 IOAPIC[2]: Set PCI routing entry (4-3 -> 0x42 -> IRQ 31 Mode:1 Active:1) 00:01:03[D] -> 4-3 -> IRQ 31 number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. number of IO-APIC #3 registers: 4. number of IO-APIC #4 registers: 4. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 02000000 ....... : arbitration: 02 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 1 0 1 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 1 0 1 1 A9 11 001 01 1 1 0 1 0 1 1 B1 12 001 01 1 1 0 1 0 1 1 B9 13 001 01 1 1 0 1 0 1 1 C1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 .... register #01: 00030011 ....... : max redirection entries: 0003 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 1 1 0 1 0 1 1 D1 01 001 01 1 1 0 1 0 1 1 D9 02 001 01 1 1 0 1 0 1 1 E1 03 001 01 1 1 0 1 0 1 1 C9 IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 00030011 ....... : max redirection entries: 0003 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 1 1 0 1 0 1 1 E9 01 001 01 1 1 0 1 0 1 1 32 02 001 01 1 1 0 1 0 1 1 3A 03 001 01 1 1 0 1 0 1 1 42 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ24 -> 1:0 IRQ25 -> 1:1 IRQ26 -> 1:2 IRQ27 -> 1:3 IRQ28 -> 2:0 IRQ29 -> 2:1 IRQ30 -> 2:2 IRQ31 -> 2:3 .................................... done. PCI: Using ACPI for IRQ routing PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 8000000 size 65536 KB PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture vesafb: probe of vesafb0 failed with error -6 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1088927383.605:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU1] (supports C1, 8 throttling states) ACPI: Processor [CPU2] (supports C1) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 0000:00:07.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio hda: SAMSUNG CD-R/RW SW-408B, ATAPI CD/DVD-ROM drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 32768 buckets, 512Kbytes TCP: Hash tables configured (established 262144 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Power state transitions not supported powernow-k8: Power state transitions not supported ACPI: (supports S0 S1 S4 S5) BIOS EDD facility v0.15 2004-May-17, 4 devices found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). SCSI subsystem initialized libata version 1.02 loaded. sata_sil version 0.54 ata1: SATA max UDMA/100 cmd 0xFFFFFF0000016C80 ctl 0xFFFFFF0000016C8A bmdma 0xFFFFFF0000016C00 irq 19 ata2: SATA max UDMA/100 cmd 0xFFFFFF0000016CC0 ctl 0xFFFFFF0000016CCA bmdma 0xFFFFFF0000016C08 irq 19 ata3: SATA max UDMA/100 cmd 0xFFFFFF0000016E80 ctl 0xFFFFFF0000016E8A bmdma 0xFFFFFF0000016E00 irq 19 ata4: SATA max UDMA/100 cmd 0xFFFFFF0000016EC0 ctl 0xFFFFFF0000016ECA bmdma 0xFFFFFF0000016E08 irq 19 ata1: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003 88:203f ata1: dev 0 ATA, max UDMA/100, 488397168 sectors: lba48 ata1: dev 0 configured for UDMA/100 scsi0 : sata_sil ata2: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003 88:203f ata2: dev 0 ATA, max UDMA/100, 488397168 sectors: lba48 ata2: dev 0 configured for UDMA/100 scsi1 : sata_sil ata3: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003 88:203f ata3: dev 0 ATA, max UDMA/100, 488397168 sectors: lba48 ata3: dev 0 configured for UDMA/100 scsi2 : sata_sil ata4: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003 88:203f ata4: dev 0 ATA, max UDMA/100, 488397168 sectors: lba48 ata4: dev 0 configured for UDMA/100 scsi3 : sata_sil Vendor: ATA Model: WDC WD2500JD-00G Rev: 02.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: ATA Model: WDC WD2500JD-00G Rev: 02.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Vendor: ATA Model: WDC WD2500JD-00G Rev: 02.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdc: drive cache: write back sdc: sdc1 sdc2 sdc3 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 Vendor: ATA Model: WDC WD2500JD-00G Rev: 02.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdd: drive cache: write back sdd: sdd1 sdd2 sdd3 Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0 device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com md: raid1 personality registered as nr 3 md: Autodetecting RAID arrays. md: autorun ... md: considering sdd3 ... md: adding sdd3 ... md: sdd2 has different UUID to sdd3 md: adding sdc3 ... md: sdc2 has different UUID to sdd3 md: sdb3 has different UUID to sdd3 md: sdb2 has different UUID to sdd3 md: sdb1 has different UUID to sdd3 md: sda3 has different UUID to sdd3 md: sda2 has different UUID to sdd3 md: sda1 has different UUID to sdd3 md: created md4 md: bind md: bind md: running: raid1: raid set md4 active with 2 out of 2 mirrors md: considering sdd2 ... md: adding sdd2 ... md: adding sdc2 ... md: sdb3 has different UUID to sdd2 md: sdb2 has different UUID to sdd2 md: sdb1 has different UUID to sdd2 md: sda3 has different UUID to sdd2 md: sda2 has different UUID to sdd2 md: sda1 has different UUID to sdd2 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: considering sdb3 ... md: adding sdb3 ... md: sdb2 has different UUID to sdb3 md: sdb1 has different UUID to sdb3 md: adding sda3 ... md: sda2 has different UUID to sdb3 md: sda1 has different UUID to sdb3 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering sdb2 ... md: adding sdb2 ... md: sdb1 has different UUID to sdb2 md: adding sda2 ... md: sda1 has different UUID to sdb2 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 184k freed SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks ACPI: Power Button (FF) [PWRF] ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 80 td 96 ohci_hcd 0000:03:00.0: OHCI Host Controller ohci_hcd 0000:03:00.0: irq 19, pci mem ffffff0000018000 ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ohci_hcd 0000:03:00.1: OHCI Host Controller ohci_hcd 0000:03:00.1: irq 19, pci mem ffffff000001a000 ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected EXT3 FS on md1, internal journal cdrom: open failed. Adding 14354036k swap on /dev/sdd1. Priority:-1 extents:1 Adding 14354036k swap on /dev/sdc1. Priority:-2 extents:1 Adding 2096376k swap on /dev/md3. Priority:-3 extents:1 cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode.