Linux version 2.4.20-pre11 (root@zaphod.stearns.org) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-112)) #3 SMP Sun Oct 27 18:10:15 EST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d000 (usable) BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4800 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000080000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 1152MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f74d0 hm, page 000f7000 reserved twice. hm, page 000f8000 reserved twice. hm, page 0009d000 reserved twice. hm, page 0009e000 reserved twice. On node 0 totalpages: 524288 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 294912 pages. Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: TYAN Product ID: GUINNESS APIC at: 0xFEE00000 Processor #1 Pentium(tm) Pro APIC version 16 Processor #0 Pentium(tm) Pro APIC version 16 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 2 Kernel command line: noapic ro root=/dev/sda2 console=ttyS1,19200n8 console=tty0 Initializing CPU#0 Detected 1592.889 MHz processor. Console: colour VGA+ 80x50 Calibrating delay loop... 3178.49 BogoMIPS Memory: 2068616k/2097152k available (2043k kernel code, 28140k reserved, 715k data, 136k init, 1179648k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU0: AMD Athlon(tm) MP 1900+ stepping 02 per-CPU timeslice cutoff: 731.57 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3185.04 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU1: AMD Athlon(tm) Processor stepping 02 Total of 2 processors activated (6363.54 BogoMIPS). Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1592.9855 MHz. ..... host bus clock speed is 265.4974 MHz. cpu: 0, clocks: 2654974, slice: 884991 CPU0 cpu: 1, clocks: 2654974, slice: 884991 CPU1 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfd7c0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware BIOS failed to enable PCI standards compliance, fixing this error. I/O APIC: AMD Errata #22 may be present. In the event of instability try : booting with the "noapic" option. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces Journalled Block Device driver loaded i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-algo-bit.o: i2c bit algorithm module i2c-algo-pcf.o: i2c pcf8584 algorithm module i2c-proc.o version 2.6.1 (20010825) pty: 1024 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7411: IDE controller on PCI bus 00 dev 39 AMD7411: detected chipset, but driver not compiled in! AMD7411: chipset revision 1 AMD7411: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio hda: SR243T, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) bond0 registered without MII link monitoring, in bonding mode. Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 1920M agpgart: Detected AMD 760MP chipset agpgart: AGP aperture is 64M @ 0xf8000000 [drm] AGP 0.99 on AMD Irongate @ 0xf8000000 64MB [drm] Initialized r128 2.2.0 20010917 on minor 0 [drm] AGP 0.99 on AMD Irongate @ 0xf8000000 64MB [drm] Initialized radeon 1.1.1 20010405 on minor 1 Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found SCSI subsystem driver Revision: 1.00 3ware Storage Controller device driver for Linux v1.02.00.027. 3w-xxxx: AEN: ERROR: Unit degraded: Unit #0. scsi0 : Found a 3ware Storage Controller at 0x1810, IRQ: 5, P-chip: 5.7 scsi0 : 3ware Storage Controller 3w-xxxx: scsi0: AEN: WARNING: Unclean shutdown detected: Unit #0. Vendor: 3ware Model: 3w-xxxx Rev: 1.0 Type: Direct-Access ANSI SCSI revision: 00 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 703318656 512-byte hdwr sectors (360099 MB) Partition check: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > usb.c: registered new driver usbdevfs usb.c: registered new driver hub hcd/ehci-hcd.c: 2002-May-07 USB 2.0 'Enhanced' Host Controller (EHCI) Driver hcd/ehci-hcd.c: block sizes: qh 96 qtd 96 itd 128 sitd 64 uhci.c: USB Universal Host Controller Interface driver v1.1 usb-ohci.c: USB OHCI at membase 0xc00dc000, IRQ 11 usb-ohci.c: usb-00:07.4, Advanced Micro Devices [AMD] AMD-766 [ViperPlus] USB spurious 8259A interrupt: IRQ7. usb.c: new USB bus registered, assigned bus number 1 usb.c: kmalloc IF f7ba3df4, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB OHCI Root Hub SerialNumber: c00dc000 hub.c: USB hub found hub.c: 4 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RRRR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface f7ba3df4 usb.c: kusbd: /sbin/hotplug add 1 usb.c: kusbd policy returned 0xfffffffe Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 2156.000 MB/sec 32regs : 1216.000 MB/sec pIII_sse : 3655.200 MB/sec pII_mmx : 3736.400 MB/sec p5_mmx : 4750.800 MB/sec raid5: using function: pIII_sse (3655.200 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. LVM version 1.0.5+(22/07/2002) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 128Kbytes TCP: Hash tables configured (established 131072 bind 43690) IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver ip_conntrack version 2.1 (8192 buckets, 65536 max) - 292 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. (recovery.c, 252): journal_recover: JBD: recovery, exit status 0, recovered transactions 2235685 to 2235939 (recovery.c, 255): journal_recover: JBD: Replayed 4978 and revoked 0/0 blocks kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 136k freed Adding Swap: 2096472k swap-space (priority -1) Adding Swap: 2096440k swap-space (priority -2) Adding Swap: 2096440k swap-space (priority -3) EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal EXT3-fs: mounted filesystem with ordered data mode.